MDD (Modular Direct Drive)

MDD Modular Direct Drive - FAQs
Q: Is it too heavy? Do I need a dual Z lead screw? A: No, a dual lead screw setup is not needed for the MDD, even when using a full-sized Creality stepper ...
Wed, Feb 19, 2020 at 1:28 PM
MDD Hot End & Extruder Combinations Matrix
The MDD is designed to reconfigure your stock extruder and hot end into a powerful, reliable direct drive combination. However, it's also designed to e...
Fri, Sep 25, 2020 at 12:53 PM
MDD Creality Ender-3 / CR-10 Printable Files
Printable files: MDD Ender-3 / CR-10 X Axis Linear Belt Adapter (required for linear X rail) MDD Ender-3 Y Axis Linear Endstop Adapter (required for li...
Thu, Oct 1, 2020 at 1:23 PM
Creality Ender-3 / CR-10 Installation Instructions
Click here to download the PDF
Fri, Jul 10, 2020 at 3:37 PM
Creality Ender-3 V2 Installation Instructions
Click here to download the PDF Click here to download the files for our custom, printable fan shroud for stock installation.
Mon, Oct 12, 2020 at 11:48 AM
Creality Ender-5 Installation Instructions
Click here to download the PDF
Fri, Jul 10, 2020 at 3:40 PM
Creality Ender-5 Printable Files
Printable files: MGN9 Alignment Tool (optional) X-Axis Tensioner (optional) Y-Axis Tensioner (optional) Z-Axis Height Limit Switch Adapter (optional)
Wed, Sep 30, 2020 at 11:09 AM
MDD Printable Fan Ducts & Housings
We originally designed the MDD primarily to repurpose the existing Mk10 and Mk8 extruder and hot end into a powerful direct drive combination, utilizing all...
Mon, Oct 12, 2020 at 11:50 AM
Geeetech A10/20/30 Installation Instructions
We do not have separate instructions for the Geeetech A-series machines at this time, but they closely resemble the Ender-3 / CR-10 installation instruction...
Wed, Feb 26, 2020 at 2:55 PM